 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENN1792D 2SK544 N-Channel Silicon MOSFET 2SK544 FM Tuner, VHF Amplifier Applications Features * * * Package Dimensions unit : mm 2040A 4.0 Low noise : NF=1.8dB typ (f=100MHz). High power gain : PG=27dB typ (f=100MHz). Small reverse transfer capacitance : Crss=0.035pF (VDS=10V, f=1MHz). [2SK544] 2.2 0.4 0.5 0.6 1.8 15.0 0.4 3.0 0.4 12 1.3 0.7 3 1.3 Specifications Absolute Maximum Ratings at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDS VGS ID PD Tch Tstg Conditions 1 : Drain 2 : Source 3 : Gate SANYO : SPA Ratings 20 5 30 300 125 --55 to +150 Unit V V mA mW C C 3.0 3.8nom Electrical Characteristics at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Leakage Current Zero-Gate Voltage Drain Current Cutoff Voltage Rank IDSS Symbol VDSX IGSS Conditions VGS= --4V, ID=100A VDS=0, VGS=5V VDS=10V, VGS=0 VDS=10V, ID=100A Ratings min 20 10 1.2* 12* --2.5 typ max Unit V nA mA V IDSS* VGS(off) * : The 2SK544 is classified by IDSS as follows (unit : mA) : D 1.2 to 3.0 E 2.5 to 6.0 F 5.0 to 12 0.7 Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N1501 TS IM / 42899 TH (KT) / 6037 TA / 2075 KI, TS No.1792-1/5 2SK544 Continued from preceding page. Parameter Forward Transfer Admittance Input Capacitance Reverse Transfer Capacitance Power Gain Noise Figure Symbol yfs Ciss Crss PG NF Conditions VDS=10V, VGS=0, f=1kHz VDS=10V, VGS=0, f=1MHz VDS=10V, VGS=0, f=1MHz VDS=10V, VGS=0, f=100MHz See specified Test Circuit. Ratings min typ 11 2.4 0.035 27 1.8 3.0 max Unit mS pF pF dB dB 24 ID -- VDS V V GS=1.2 1.0V 24 ID -- VGS VDS=10V 20 20 Drain Current, ID -- mA 16 Drain Current, ID -- mA 0.8V 0.6V 0.4V 0.2V 16 8 8 0V 4 --0.2V --0.4V 4 0 0 2 4 6 8 10 12 ITR00819 0 --1.5 --1.0 --0.5 ID S S =1 0 12 12 0m 8m A 5m A 3m A A 0.5 1.0 1.5 ITR00820 Drain-to-Source Voltage, VDS -- V 20 |yfs| -- VGS Gate-to-Source Voltage, VGS -- V 3 |yfs| -- ID Forward Transfer Admittance, |yfs| -- mS Forward Transfer Admittance, |yfs| -- mS VDS=10V f=1kHz 16 f=1kHz 2 0m A 8m A 5mA 3m A 12 10 ID S S =1 7 5 8 4 3 2 5 --1.5 0 --1.0 --0.5 0 0.5 1.0 1.5 Gate-to-Source Voltage, VGS -- V ITR00821 7 1.0 2 3 5 7 10 2 ITR00822 Drain Current, ID -- mA 16 3 2 VGS(off) -- IDSS Forward Transfer Admittance, |yfs| -- mS |yfs| -- IDSS VDS=10V Cutoff Voltage, VGS(off) -- V 14 VDS=10V VGS=0 f=1kHz --1.0 7 5 12 10 3 2 8 6 --0.1 4 5 7 1.0 2 3 5 7 10 2 ITR00823 5 7 1.0 2 3 5 7 10 2 ITR00824 Drain Current, IDSS -- mA Drain Current, IDSS -- mA No.1792-2/5 2SK544 10 Ciss, Crss -- VDS Forward Transfer Admittance, |yfs| -- mS f=1MHz VGS=0 Ciss 14 |yfs| -- VDS VGS=0 f=1kHz Input Capacitance, Ciss -- pF Reverse Transfer Capacitance, Crss -- pF 5 3 2 1.0 5 3 2 0.1 5 3 2 0 4 8 12 16 12 10 8 6 4 Crss 20 24 ITR00825 2 0 0 2 4 6 8 10 12 ITR00826 10 7 5 3 2 Input Admittance yis -- VDS VGS=0 f=100MHz cis Drain-to-Source Voltage, VDS -- V Drain-to-Source Voltage, VDS -- V 5 3 2 Reverse Transfer Admittance yrs -- VDS VGS=0 f=100MHz --crs -- pF gis -- mS cis -- pF 1.0 7 5 3 2 0.1 7 5 --crs 3 gis 0.1 7 5 0 2 4 6 8 10 12 14 2 0.01 0 2 4 6 8 10 12 14 5 3 2 Forward Transfer Admittance yfs -- VDS VGS=0 f=100MHz Drain-to-Source Voltage, VDS -- V ITR00827 10 7 5 3 2 Output Admittance yos -- VDS VGS=0 f=100MHz Drain-to-Source Voltage, VDS -- V ITR00828 gfs -- mS --bfs -- mS 10 7 5 3 2 gos -- S cos -- pF gfs 1.0 7 5 3 2 0.1 cos --bfs gos 1.0 0 2 4 6 8 10 12 14 7 5 0 2 4 6 8 10 12 14 Drain-to-Source Voltage, VDS -- V 5 3 ITR00829 5 3 2 3 2 100 7 5 Input Admittance yis -- f Drain-to-Source Voltage, VDS -- V ITR00830 3 2 0.1 7 5 3 2 Reverse Transfer Admittance yrs -- f VDS=10V VDS=10V 10 m 2 A ID = m A 0.7 1.0 7 10 ID=10mA 0.7mA 5 grs -- S cis -- pF 3 2 10 3 2 0.1 7 5 3 2 7 10 2 cis ID =10m A 0.7mA 3 2 1.0 7 5 0.01 3 2 ID = 0. 10m A 5 7m A 7 7 5 3 2 0.001 7 1000 ITR00832 3 5 7 100 2 3 Frequency, f -- MHz 3 2 5 7 1000 ITR00831 1.0 7 10 2 3 5 7 100 2 3 5 Frequency, f -- MHz No.1792-3/5 --crs -- pF gis -- mS 7 5 --crs gi s gr s 2SK544 5 3 2 Reverse Transfer Admittance yfs -- f VDS=10V 5 3 2 1.0 5 3 Output Admittance yos -- f VDS=10V 100 5 ID=10mA 10 7 5mA 1mA gfs 10 2 --bfs -- mS 5 3 2 1.0 7 5 3 2 7 s --b f 3 2 5 3 2 A 5m 2mA 1mA 5 3 2 0 =1 ID m A 1m 3 2m A 1.0 7 5 3 0.01 5 3 2 7 ID=10mA 0.7mA cos 1.0 5 3 2 7 A 5 7 2 3 10 2 100 Frequency, f -- MHz 34 30 26 2 5 7 1000 ITR00833 10 2 3 5 7 100 2 3 5 Frequency, f -- MHz 320 ITR00834 PG, NF -- ID Allowable Power Dissipation, PD -- mW VDS=10V f=100MHz PD -- Ta 300 280 240 200 160 120 80 40 0 Voltage Gain, PG -- dB Noise Figure, NF -- dB PG 22 18 14 4 NF 2 0 3 5 7 1.0 2 3 5 7 10 2 ITR00835 0 20 40 60 80 100 120 140 160 Drain Current, ID -- mA Ambient Temperature, Ta -- C ITR00836 PG, NF Specified Test Circuit L1 to 20pF to 20pF L2 Rg 50 to 30pF to 30pF RL 50 VG VD Unit(capacitance : F) L1 : 1.0mm plated wire 10mm 6T, tap : 3T from H side L2 : 1.0mm plated wire 10mm 7T, tap : 4T from H side No.1792-4/5 cos -- pF 2mA gos -- mS gfs -- mS 7 5 0.1 ID=10mA 7mA 5mA 3mA g os 3 2 10 2SK544 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2001. Specifications and information herein are subject to change without notice. PS No.1792-5/5 |
Price & Availability of 2SK544E
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |